Amazingly affordable,
a BioBot for every application.
Compare BioBots:
4-axis
Robotic Arm
5
BioAssemblyTools in a single run
HEPA Filtration Optional
Detached touch screen controls
Compatible
Compatible
Build Volume
11 in (l) x 7 in (w) x 2.75 in (h)
27.9 cm (l) x 17.8 cm (w) x 6.9 cm (h)
3D Printing Technology
Pneumatic or Mechanical Dispense
BioAssemblyTools Compatibility
Works with most tools
HEPA Specifications
99.97% of particles to 0.3 µ (w/ HEPA)
Electrical Panel
External
Air Flow Requirements
100psi 1cfm
Base
Benchtop
Temperature Controls
Stage: 10 to 60 C
3D Syringe | Hot: Up to 150 C
3D Syringe | Cold: Down to 0 C
Connections
Power Supply Input
RJ45 CAT-5
Pneumatic Air Fitting
Electrical Requirements
Bioprinter:
208-220 50/60 Hz Single Phase @ 15 Amp Isolated Receptacle (NEMA 6-20R)
External Electrical Panel:
208-220 50/60 Hz Single Phase @ 20 Amp Isolated Receptacle (NEMA 6-20R)
NOTE: Standalone circuits required.
Dimensions & Weight
Bioprinter with HEPA filtration:
36.4 in (w) x 26.3 in (d) x 44.5 in (h)
92.46 cm (w) x 66.8 cm (d) x 113.03 cm (h)
175 lbs
79.38 kg
Bioprinter with enclosure:
36.4 in (w) x 26.3 in (d) x 31.4 in (h)
92.46 cm (w) x 66.8 cm (d) x 79.75 cm (h)
140 lbs
63.5 kg
External Electrical Panel:
24 in (w) x 29 in (d) x 23 in (h)
60.96 cm (w) x 73.66 cm (d) x 58.42 cm (h)
6-axis
Robotic Arm
8
BioAssemblyTools in a single run
HEPA Filtration
Clean Room
Ready
Attached touch screen controls
Compatible
Compatible
Accessory Ready
Works with BioStorageBot & imagers
Build Volume
12 in (l) x 10 in (w) x 7 in (h)
30.5 cm (l) x 25.4 cm (w) x 17.8 cm (h)
3D Printing Technology
Pneumatic or Mechanical Dispense
BioAssemblyTools Compatibility
Works with all tools
HEPA Specifications
99.97% of particles to 0.3 µ
Biosafety Cabinet Compatibility
-
Electrical Panel
Internal
Air Flow Requirements
100psi 1cfm
Base
Optional Table
Temperature Controls
Stage: 10 to 60 C
3D Syringe | Hot: Up to 150 C
3D Syringe | Cold: Down to 0 C
Connections
Power Supply Input
RJ45 CAT-5
Pneumatic Air Fitting
Electrical Requirements
Bioprinter:
208-220 50/60 Hz Single Phase @ 20 Amp Isolated Receptacle (NEMA 6-20R)
-
Dimensions & Weight
Bioprinter:
36.8 in (w) x 29.5 in (d) x 52.9 in (h)
93.5 cm (w) x 75.0 cm (d) x 134.3 cm (h)
600 lbs
272 kg
BAB400 Standard Table:
36.8 in (w) x 29.5 in (d) x 81.75 in (h)
93.5 cm (w) x 75.0 cm (d) x 81.75 in (h)
6-axis
Robotic Arm
10
BioAssemblyTools in a single run
HEPA Filtration
Clean Room
Ready
Biosafety Cabinet
Integrated
Attached touch screen controls
Compatible
Compatible
Build Volume
12 in (l) x 10 in (w) x 7 in (h)
30.5 cm (l) x 25.4 cm (w) x 17.8 cm (h)
Pneumatic or Mechanical Dispense
BioAssemblyTools Compatibility
Works with all tools
HEPA Specifications
99.97% of particles to 0.3 µ
Biosafety Cabinet Compatibility
Integrated Class-II, Type-A
Electrical Panel
External (w/ under device cubby)
Air Flow Requirements
100psi 1cfm
Base
Powered lift base
Temperature Controls
Stage: 10 to 60 C
3D Syringe | Hot: Up to 150 C
3D Syringe | Cold: Down to 0 C
Connections
Power Supply Input
RJ45 CAT-5
Pneumatic Air Fitting
Electrical Requirements
Overall Requirements:
208-220V 50/60 Hz Single Phase @ 20 Amp Standalone, Isolated Circuit with 2x NEMA 6-20R outlets
Power for Biosafety Cabinet:
208-220V 50/60 Hz Single Phase @ 7 Amp Isolated Receptacle (1x NEMA 6-20R)
(The BSC is labeled with a 10 Amp rating at 230VAC)
Power for External Electrical Panel:
208-220V 50/60 Hz Single Phase @ 12.76 Amp Isolated Receptacle (1x NEMA 6-20R)
NOTE: A standalone circuit is required and cannot be shared with other devices.
Dimensions & Weight
Bioprinter:
65.125 in (w) x 33.25 in (d) x 75.6875 (h)
165.42 cm (w) x 84.46 cm (d) x 192.25 cm (h)
1200 lbs
544.31 kg
External Electrical Panel:
24 in (w) x 29 in (d) x 23 in (h)
60.96 cm (w) x 73.66 cm (d) x 58.42 cm (h)